Universal remover for Q and D-products
Removit is the universal remover for all 'Q-' (Q4 White and Q3 White) and 'D-products' (D-Fuse and D-Gree). After applying Removit, you can choose to rinse the screen layer of the greenhouse cover with water or let it rain down.
Benefits of Removit :
- ✅ Universal: Suitable for all 'Q' and 'D-products'
- ✅ Flexible: Can be removed by spraying or natural rainfall
- ✅ Safe: Non-ADR classified and safe to use
Dosage
A solution of 250 litres of Removit with 1750 litres of water is enough to remove one hectare of screen material from each greenhouse cover (glass, polycarbonate, foil, acrylic). Add Removit to clean water while stirring. Depending on the thickness and age of the screen layer, the concentration can be adjusted.
Instructions for use
Spray the Removit solution on a dry screen layer, ensuring that the entire surface is moistened. Allow at least 30 minutes for the solution to break down the screen layer before rinsing manually or before rainfall. Use the Removit solution within 6 hours of preparation.
If rain is chosen, a few showers in the following weeks will be sufficient to fully clean the greenhouse cover. If there is little or no rain, manual spraying with water is recommended to avoid having to reapply Removit.
Once the screen layer has broken down and dried, thoroughly rinse the surface with water using a deck washer or high-pressure sprayer.
Environment and storage
Removit complies with the discharge decree. To avoid changes in the pH value of the water, close the water basin during the application and removal of screen products. Removit is suitable only for the removal of 'Q' and 'D-products'. Store Removit in a frost-free environment. When kept in dry, closed packaging, it can be stored for approximately 12 months.
