Description
Q-Black is an adjustable shading agent, which means that it is widely applicable for crops and areas where maximum shading is needed. The special composition of Q-Black ensures a very high heat reduction and a maximum protection. User experiences show minimal wear off on the apex of the roof with the use of Q-Black. It is very important to shade the top of the greenhouse because the sunlight shines from early morning until late in the evening. You ensure a stable climate with the use of Q-Black.
Q-Black does not contain any components that are harmful to the environment.
Advantages Q-Black :
Dosage Q-Black
With Q-Black it is possible to shade your crops or workspace in the most optimal way. With dilution each shade percentage below can be established.
Dosages are based on a 2.000 liter spraying solution per hectare
| Buckets per ha |
Shading |
Lifespan (weeks) +/- |
Weather resistance |
| 34 |
88% |
21 - 23 |
Maximum |
| 25 |
81% |
18 - 20 |
Maximum |
| 20 |
74% |
15 - 17 |
Maximum |
| 17 |
68% |
12 - 14 |
Medium |
| 15 |
60% |
10 - 11 |
Medium |
| 13 |
55% |
6 - 9 |
Medium |
Usage
For example, Q-Black is successfully applied in Phalaenopsis cultivation. Besides that Q-Black is used for a better work environment in processing areas.
Calculate the number of buckets needed to get to the correct shading percentage (can be seen in table above). Mix the shading agent with clean water. Use enough spraying liquid to divide Q-Black evenly. The amount of spraying liquid depends on the spraying method. Use 1.200 – 1.400 liters per hectare when applied mechanically. 1.500 to 1.700 liters per hectare is recommended for manual application. We recommend to continuously stir the liquid during the application of the shading agent. Apply Q-Black on a clean dry surface
Q-Black can easily be removed from the greenhouse. Rain will clean the greenhouse when you apply Removit in the correct dosage. Q-Black can also be washed off manually when it doesn’t rain for a long time.Q-Black can be removed from the greenhouse.
